User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 DECEMBER 1994
MMC: 712 LCR ROUTE TABLE
DESCRIPTION:
The LCR ROUTE TABLE has the responsibility for the selection of a specific trunk
group in the completion of an outward bound call. This table works in conjunction
with LCR DIGIT TABLE, LCR TIME TABLE, LCR COS TABLE and LCR MODIFIED
DIGITS TABLE. After the user dials a valid digit string, the system will use the LCR
ROUTE TABLE to select a specific predetermined trunk group. There is a maximum
number of 16 routes available beginning with the ROUTE NUMBER 1. If more than
one trunk group are available for call completion, the system will use the first
designated trunk group and then start to utilize succeeding trunk groups. If all trunk
groups are busy in a selected route, call queue will become active and allocate
trunks as they become available.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF 712
Display shows
LCR ROUTE (01:1)
C:1 G:NONE M:---
2. Dial LCR ROUTE index number 1–16
(e.g., 05)
LCR ROUTE (05:1)
C:1 G:NONE M:---
OR
Press UP or DOWN to selected index and
press RIGHT soft key to move cursor and
advance to next step 3
3. Dial TIME BAND index number 1–4 (e.g., 2)
OR
LCR ROUTE (05:2)
C:1 G:NONE M:---
Press UP or DOWN to selected index and
press RIGHT soft key to move cursor and
advance to next step 4
HOME
PAGE
Table of
Contents