User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 DECEMBER 1994
MMC: 710 LCR DIGIT TABLE
DESCRIPTION:
The LCR DIGIT TABLE contains all numerical digits for the completion of outgoing
call placement. This table works in conjunction with LCR ROUTE TABLE, LCR TIME
TABLE and LCR MODIFY DIGITS TABLE. There is a maximum of 500 entries with a
digit string length of ten numerical digits. This system will automatically maintain
entered digit strings in numerical order. The characters  and # are also accepted
for use with feature codes.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF 710
Display shows
LCR DIGIT (001)
DIGIT:
2. Dial LCR entry (e.g., 005)
OR
LCR DIGIT (005)
DIGIT: _
Press UP or DOWN to select entry and press
RIGHT soft key to move cursor
3. Enter LCR digit string via the dial keypad
Press RIGHT soft key
LCR DIGIT (005)
DIGIT:305426
OR
Press LEFT soft key to return to step 1
4. Enter digit length (00–31)
Cursor will move to RT:
LCR DIGIT (005)
LENGTH:10 RT:01
Enter route selection (1–16)
OR
Press LEFT soft key to return to length value
Valid entry will return you to step 1
HOME
PAGE
Table of
Contents