User guide

PROSTAR DCS COMPACT PROGRAMMING

TECHNICAL MANUAL PART 2 DECEMBER 1994

MMC: 101 CHANGE USER PASSCODE

DESCRIPTION:

Allows the system administrator or technician to reset any keyset’s passcode to its

default value of “1234.” This MMC cannot display station passcodes; it can only

reset them to default.

Keyset users can set or change their individual passcodes. The passcode is used to

lock or unlock the keyset for toll restriction override and to access the DISA feature.

NOTE: Default passcodes cannot be used for toll restriction override or for DISA access.

PROGRAM KEYS

UP & DOWN Used to scroll through options

KEYPAD Used to enter selections

SOFT KEYS Move cursor left and right

SPK Used to store data and advance to next MMC

HOLD Used to clear previous entry

ACTION DISPLAY

1. Press TRSF 101

Display shows

[201] PASSCODE

PASSCODE:****

2. Dial keyset number (e.g., 205)

[205] PASSCODE

PASSCODE:****

Use UP or DOWN to scroll through

keyset numbers and press RIGHT

soft key to move the cursor right

3. Press HOLD to reset passcode

[205] PASSCODE

PASSCODE : 1234

4. Press TRSF to store and exit

Press SPK to store and advance to next MMC

DEFAULT DATA: ALL STATION PASSCODES = 1234