User guide

PROSTAR DCS COMPACT PROGRAMMING

TECHNICAL MANUAL PART 2 JUNE 1995

MMC: 608 ASSIGN REVIEW BLOCK

DESCRIPTION:

NOTE: This MMC only applies to systems with Caller ID software.

Provides a means of adding or deleting Caller ID review blocks to an individual

keyset. With the ability to add or delete blocks, it will not be necessary to waste

these on non-display keysets. The free list will show how many bins are left to be

assigned. The system automatically assigns ten bins to each keyset. Each keyset

may be assigned a maximum of 50 bins.

PROGRAM KEYS

UP & DOWN Used to scroll through options

KEYPAD Used to enter selections

SOFT KEYS Move cursor left and right

SPEAKER Used to store data and advance to next MMC

HOLD Used to clear entry

TRSF To exit programming

ACTION DISPLAY

1. Press TRSF 608

Display shows first station

[201] REVW BLOCK

10 : 840 FREE

2. Enter desired extension (e.g., 205)

[205] REVW BLOCK

10 : 840 FREE

Press UP or DOWN key to make selection

and press RIGHT soft key to advance cursor

3. Enter valid number for bins (e.g., 5 )

[205] REVW BLOCK

50 : 800 FREE

Press UP or DOWN key to make selection

Press HOLD key to delete bin(s)

4. Press TRSF to store and exit

Press SPK to store and advance to next MMC

DEFAULT DATA: ALL KEYSETS: ONE BLOCK OF TEN BINS