User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 NOVEMBER 1997
MMC: 606 ASSIGN SPEED BLOCK
DESCRIPTION:
Provides a means of adding or deleting speed dial blocks to the system or an
individual keyset. With the ability to delete a block or blocks or speed dial, it will not
be necessary to waste these on such items as voice mail, DPIMs or stations that do
not require the ability to use speed dial. The Free List will show how many bins are
left to be assigned.
A library of up to 1500 speed dial numbers may be allocated as needed. RAM Pack
1 provides 500 speed dial numbers. RAM Pack 2 and Caller ID software provide
1500 speed dial numbers. The system list can have up to 500 numbers and each
station can have up to 50 numbers. Speed dial numbers are assigned in blocks of
ten. Each speed number may contain up to 18 digits.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear entry
TRSF Used to exit programming
ACTION DISPLAY
1. Press TRSF 606
Display shows
FREE LIST:60
SYSTEM:20
2. Press RIGHT soft key to advance to next line
FREE LIST:60
SYSTEM:20
3. Make a selection of SYSTEM or EXT
using UP or DOWN key
FREE LIST:60
EXT201:1
Press RIGHT soft key to advance cursor
4. Enter desired extension number via dial
keypad (e.g., 205)
FREE LIST:60
EXT205:1
OR
Press UP or DOWN key to make selection and
press RIGHT soft key to advance cursor
HOME
PAGE
Table of
Contents