User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 MARCH 1998
MMC: 605 ASSIGN EXTERNAL PAGE ZONE
DESCRIPTION:
This MMC is used to define the members of each external page zone. Each zone
must contain the audio circuit (360) as a member to and however many of the MISC
card relays (361 to 364) as required to receive an audio output. If 360 is not
assigned as a member only a contact closure will occur when that page zone is
accessed. When they are assigned these members (audio circuit and relays) will
operate in unison to perform a page. A page zone can have up to 5 members and
each member (audio circuit or relay) can be in multiple zones.
NOTE: The system will only have page relays if a MISC card is installed. If a MISC
board is not installed, only the audio circuit (360) can be assigned as a page zone
member.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF 605
Display shows first external page zone
EXT.PAGE ZONE:(5)
MEMBER 01:NONE
2. Dial page zone number (e.g., 6)
OR
EXT.PAGE ZONE:(6)
MEMBER 01:NONE
Use UP or DOWN to select desired page zone
numbers and use press RIGHT soft key to
move the cursor
3. Dial member number (e.g., 05)
OR
EXT.PAGE ZONE:(6)
MEMBER 05:
Use UP or DOWN to select member numbers
and use the RIGHT soft key to move the cursor
OR
Press the LEFT soft key to return to step 2 above
HOME
PAGE
Table of
Contents