User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 DECEMBER 1994
MMC: 604 ASSIGN STATION TO PAGE ZONE
DESCRIPTION:
Allows the technician to assign a keyset to any of the four internal paging zones and
all page (page + ). The total number of keysets that can receive a page is limited
to 80. A keyset may be assigned to more than one zone.
The assignment is controlled by the use of class marks. If a keyset is flagged as “1”
in a zone column, it will receive pages for that zone. If the keyset is flagged as “0,” it
will not receive pages for that zone. Keysets can receive pages for more than one
zone.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear entry
ACTION DISPLAY
1. Press TRSF 604
Display shows
ENTRY:STN :1234*
01:NONE:00001
2. Enter index number (01–80, e.g., 05)
via dial keypad
ENTRY:STN :1234*
05:NONE:00001
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor
3. Enter station number (e.g., 205) via dial
keypad
ENTRY:STN :1234*
05:205 :00001
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor
4. Move cursor under page zone desired by
pressing UP or DOWN key, enter the digit
ENTRY:STN :1234*
05:205 :01001
1 under zone and press RIGHT soft key to
return to step 2 to continue with entries
HOME
PAGE
Table of
Contents