User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 DECEMBER 1994
MMC: 603
4. Press RIGHT soft key to move cursor to
number of member and enter valid member
[81] TRK GROUP
MEMBER 05:NONE
number (1–80, e.g., 05) via dial keypad
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor
5. Enter valid trunk number (e.g., 729)
OR
[81] TRK GROUP
MEMBER 01:729
Press UP or DOWN key to make selection
and press RIGHT soft key to return to step 2
6. Repeat steps 1–6 to remove trunk from
group 9 if necessary
7. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: ALL TRUNKS ARE IN TRUNK GROUP 9
RELATED ITEMS: LCR PROGRAMMING
TENANT PROGRAMMING
HOME
PAGE
Table of
Contents