User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 NOVEMBER 2000
MMC: 601
2. Dial group number (e.g., 505)
OR
[505] STN.GROUP
TYPE:NORMAL GRP
Press UP or DOWN key to select group
Press LEFT soft key to move cursor to type
of group and DIAL group type (0–2, e.g., 1)
OR
Press UP or DOWN key to make selection
Press LEFT soft key to move cursor to TYPE
[505] STN GROUP
TYPE:VMAA
3. Dial feature option number (0–6, e.g., 0)
OR
[505] STN GROUP
RING:SEQENTIAL
Press UP or DOWN key to make selection
Press RIGHT soft key to move cursor to
ring value
4. Dial ring option (0–2, e.g., 1)
OR
[505] STN GROUP
RING:DISTRIBUTE
Press UP or DOWN key to make selection
Press LEFT soft key to move cursor
back to RING or press RIGHT soft key to
return to step 2
5. Dial next feature option and continue
OR
[505] STN GROUP
RING:DISTRIBUTE
Press UP or DOWN key to select option
OR
Press LEFT soft key to return to step 2
6. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: NORMAL GROUP
RELATED ITEMS: MMC 203 ASSIGN UA DEVICE
MMC 204 COMMON BELL CONTROL
HOME
PAGE
Table of
Contents