User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 NOVEMBER 1997
MMC: 507 ASSIGN AUTO NIGHT TIME
DESCRIPTION:
Use this MMC to program Auto Night settings. A NIGHT key is not needed as the
system will switch automatically; however, it is helpful to have a dedicated button so
the status can be manually changed. The start time is the time the system will
switch from day to night service. The end time is the time the system will switch
from night service to day service.(e.g., start 17:00 Wednesday and end at 08:00
Thursday).
Use the following example of Auto Night Time service:
Mon End= 08:30 Mon Start= 17:00
Tue End= 08:30 Tue Start= 17:00
Wed End= 08:30 Wed 17:00
Thur End= 08:30 Thur 17:00
Fri End= 08:30 Fri Start= 17:30
Sat End= 00:00 Sat Start= 00:00
Sun End= 00:00 Sun Start= 00:00
Using a 24 hour clock in the example above notice that the END time is within the
same 24 hour period. The system will stay in NIGHT from the previous day until the
end time which is 08:30. Monday starts the night time at 17:00. The system will
stay in night until it reaches the end time which is Tuesday ( the next 24 hour
period) at 08:30. Each day starts at 00:00 and ends at 24:00
FEATURE KEYS
0 SUN 4 THU
1 MON 5 FRI
2 TUE 6 SAT
3 WED
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
HOME
PAGE
Table of
Contents