User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 NOVEMBER 1997
2.1.1
PART 2. PROGRAMMING PROCEDURES
2.1 PROGRAM PROCEDURES
THE FOLLOWING INSTRUCTIONS FOR EACH MMC ASSUME THAT YOU HAVE
ALREADY OPENED PROGRAMMING.
HELPFUL HINT:
When you are finished programming in MMCs 100–811 and have other programming
to do, press SPK to exit the MMC but stay in the programming mode and use one of
the following methods.
1. Dial another MMC code directly and continue programming.
2. Press VOLUME UP and DOWN keys to scroll through all MMC codes. When the
desired MMC code is reached, press SPK and continue programming.
Pressing TRSF will always save changes and exit the programming mode.
HOME
PAGE
Table of
Contents