User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 NOVEMBER 2000
MMC: 501
TIMER NAME DEFAULT RANGE
SMDR START/DTMF 15 SEC 1–255 SEC
SYS HOLD RECALL 45 SEC 0–255 SEC
TRANSFER RECALL 15 SEC 0–255 SEC
NOTE: Timers marked with an asterisk require optional hardware and/or software.
TIMER DESCRIPTIONS
ALERT TONE TIMER This timer sets the duration of the attention tone preceding a
call to a keyset in the Voice Announce or Auto Answer
mode. This tone will also precede a forced Auto Answer call.
ALM REM INTERVAL This timer controls the time length between ring attempts at
a station when alarm reminder is set.
ALM REM RING OFF This timer controls the length of the ring cycle duration when
alarm reminder is set at a station.
ATT RECALL TIME This is the length of time a transfer recall will ring at a station
before recalling the operator.
AUTO REDIAL INT This timer controls the time between attempts after RETRY
dialing is set on a station.
AUTO REDIAL RLS This timer controls the duration of a Ring No Answer
condition on a retry number dialed before the auto redial is
automatically canceled.
CALLBACK NO ANS This timer controls the time before the callback is
automatically canceled when a callback detects Ring No
Answer.
CADENCE CARD TONE INT TIME This is the call record tone interval time. An
entry other than zero will cause a tone to be
heard by all the parties in a recorded
conversation. The range for the tone is 001
(every second) to 255 (every 255 seconds). A
value of 000 means no tone.
CAMP ON RECALL This timer controls the duration of time a camped-on call will
stay at a destination before recalling to the transferring
station.
CID DISPLAY TIME The amount of time that the Caller ID information remains on
the keyset’s display.
HOME
PAGE
Table of
Contents