User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 DECEMBER 1994
MMC: 500 SYSTEM-WIDE COUNTERS
DESCRIPTION:
Used to set the values of the system counters. The counters are listed below with a
brief description of each.
1. ALARM REMINDER This is the number of times that an alarm reminder
will ring a station before canceling. RANGE = 1–99.
2. AUTO REDIAL This is the number of times the system will redial an
outside number after the auto redial feature has been
activated. RANGE = 1–15.
3. DISA INTERCOM CALL This counter sets the maximum number of intercom
calls that can be made after accessing a DISA line.
RANGE = 1–99.
4. DISA LOCK OUT This is the number of attempts to incorrectly access a
DISA line the system will allow before locking out the
DISA line. RANGE = 1–99.
5. NEW CALL This is the number of times the system will allow a
user to signal New Call on a C.O. line during one call.
RANGE = 1–99.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 500
Display shows
ALARM REM.CNTER
01
HOME
PAGE
Table of
Contents