User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 JUNE 1995
MMC: 414 ASSIGN CALLER ID TRUNKS
DESCRIPTION:
NOTE: This MMC only applies to systems with Caller ID software.
Allows the system administrator or technician to activate Caller ID on a per-trunk
basis. Activating Caller ID will delay the incoming ring indication at the operator by
two ring cycles to allow for the collection of the Caller ID data.
Each trunk has the following options:
0 NORMAL This is not a Caller ID trunk.
1 CID TRUNK This is a Caller ID trunk.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 414
Display shows
[701] CID TRUNK
NORMAL
2. Dial trunk number (e.g., 705)
OR
[705] CID TRUNK
NORMAL
Press UP or DOWN to select trunk
and press right soft key to move cursor
OR
OR
Press ANS/RLS to select ALL
[ALL] CID TRUNK
??
3. Dial 1 or 0 to change options
[705] CID TRUNK
CID TRUNK
OR OR
Press UP or DOWN to select an option and
press right soft key to return to step 2
[ALL] CID TRUNK
CID TRUNK
HOME
PAGE
Table of
Contents