User guide

PROSTAR DCS COMPACT PROGRAMMING
TECHNICAL MANUAL PART 2 NOVEMBER 1997
MMC: 412 ASSIGN TRUNK SIGNAL
DESCRIPTION:
Assigns signaling for E&M cards. This MMC is only for E & M trunks. These trunks
may also use the translation tables in MMC 714. The E & M trunks can use the
translation tables if specified in MMC 416. The signaling types are as follows:
SIGNALLING
IMMEDIATE DELAYED WINK
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 412
Display shows
[705] TRK SIGNAL
IMMEDIATE START
2a. Enter desired trunk number (e.g., 706)
OR
[706] TRK SIGNAL
IMMEDIATE START
Press UP or DOWN key to make selection
Press RIGHT soft key to move cursor
OR
Press ANS/RLS to select all trunks
[ALL] TRK SIGNAL
?
2b. Enter desired trunk type selection from above
OR
[706] TRK SIGNAL
WINK
Press UP or DOWN key to make selection
and press RIGHT soft key to return to step 2a
3. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
HOME
PAGE
Table of
Contents