User Guide

dCS Verdi Encore User Manual Manual for Software Issue 1.0x
dCS Ltd August 2005
Manual filename: Verdi Encore Manual v1.0x.doc Page 53 email: [e-mail]
English version web-site: www.dcsltd.co.uk
The DAC displays “Wrong Word Clock @ Verdi Clk In”
• Verdi has detected a clock frequency other than 44.1kHz on it’s WClk In
connector. Ensure the clock source is set to 44.1kHz.
• With the DAC in master mode, check there is an undamaged BNC cable
connecting Verdi’s WClk Out to the DAC’s WClk In.
• Ensure the cable is D.C. coupled. A.C. coupled cables are not suitable for
use with Word Clock or SDIF.
The DAC remains muted
• If the DAC is displaying the Volume setting, change the Disp menu page
setting to Disp:Fs and check for error messages.
• Check that all the units in your system are loaded with the same 1394 code
issue. If not, contact dCS for an update CD.
• If all else is in order, switch off the Transport, the Upsampler and the DAC
then switch them on again. If this situation keeps recurring, please consult
your dealer.
The DAC takes a long time to unmute
• The 1394 interface can take around 30 seconds to settle and unmute.
• Try setting the DAC to 1394 mode before setting the Upsampler to DSD
mode.
• If your system is in standby mode or switched off, try turning the DAC on
before the Upsampler or Transport.
If this information does not resolve the problem, please contact your dealer for
advice.