User Guide

dCS Verdi Encore User Manual Manual for Software Issue 1.0x
dCS Ltd August 2005
Manual filename: Verdi Encore Manual v1.0x.doc Page 38 email: [e-mail]
English version web-site: www.dcsltd.co.uk
USING YOUR dCS VERDI ENCORE FOR THE FIRST TIME
Thank you for purchasing this dCS Verdi Encore. Before attempting to use your
Verdi Encore, please read at least the rest of this section and the “Step-by-Step
Guide” on page 10. This will enable you to set the unit up quickly with your hi-fi
system.
What’s in the Box?
The box should contain the following:
• dCS Verdi Encore
• User Manual
• Control Summary
• Power Cable
• Spare Fuses (2)
• Remote Control unit
• Remote Control guide
• 3 x AAA batteries
• 1 pt Pozidriv screwdriver (for fitting the Remote Control unit batteries)
• IEEE 1394 cable assembly
• BNC cable
• 2.5mm hex key (for removing the transit screws)
• Top glass plate
• 4 x bolts and plastic washers (for fitting the top glass plate)
• 4mm hex key (for fitting the top glass plate)
IMPORTANT! To reduce the risk of transit damage, the mechanism is clamped with 4 transit
screws before shipping. These MUST be removed before use. See page 43 or
the “Read This Before Using Your dCS Verdi!” sheet for details. Also, the
top glass plate should be fitted before use. (Your dealer may have done this
for you.)
IMPORTANT! For safety reasons, the Remote Control is shipped with the batteries packed
separately. For fitting details, see page 45.
Check the contents of the inner carton very carefully against the list above.
Notify your dealer as soon as possible if anything is missing or damaged. dCS
suggest that all of the original packaging is retained for use when transporting
any units. Replacement packaging can be ordered from dCS or our distributors.
Safety Notice
Verdi Encore contains no user serviceable parts. Do not attempt to open the
case as there are potentially dangerous voltages present inside. In the event of
the unit developing a fault, please consult your dealer.
IMPORTANT! This equipment MUST be connected to a safety earth (or ground) via the
power cable.