User Guide

dCS Verdi Encore User Manual Manual for Software Issue 1.0x
dCS Ltd August 2005
Manual filename: Verdi Encore Manual v1.0x.doc Page 27 email: [e-mail]
English version web-site: www.dcsltd.co.uk
Transport Controls
The Play / Pause, Stop / Eject, Previous Track and Next Track buttons
control the transport in the same way as the buttons on the front panel.
The Previous Track and Next Track buttons also double as Fast Forward and
Fast Reverse buttons on the remote control.
When the Menu is open the Previous Track and Next Track buttons are used
to scroll up and down the menu.
Display Button
Pressing this button displays the track number being played for approximately 5
seconds and then reverts back to Track time.
Vol/Bal Button
Pressing the Vol/Bal button puts a dCS DAC in Balance mode – use the
Up/Down buttons to adjust the Balance. Balance mode times out after 5
seconds if no adjustment is made.
This button does not affect Verdi Encore.
0 – 9 Buttons
The ten numbered buttons are used to select track numbers. We recommend
using the numeric keypad for selecting tracks. For example, if track 5 on a disc
is being played but you want to go back to track 3, just press 3 on the remote
control keypad.
Menu Button
Opens the Menu. Use the Previous Track and Next Track buttons to page
through the menu and press Menu again to select a function. Note that the
menu may time out if there is no activity for 5 seconds.
Up and Down Buttons
Use the Up/Down buttons to alter the Volume setting of a dCS DAC.
These buttons do not affect Verdi Encore.
Mute Button
Press the Mute button to mute or un-mute a dCS DAC.
This button does not affect Verdi Encore.