User Guide

dCS Verdi Encore User Manual Manual for Software Issue 1.0x
dCS Ltd August 2005
Manual filename: Verdi Encore Manual v1.0x.doc Page 20 email: [e-mail]
English version web-site: www.dcsltd.co.uk
THE HARDWARE – CONTROLS AND CONNECTORS
Front Panel
Men uPower
STBY
SACD
PWR
CD
RPT
RPT1
A-B
1394
CONT
PROG
RAND
WCLK
Upsampling CD/SACD Transport
dCS Verdi Encore
Select
RCA
UPS
AES
HYBD
Step
CD
Update
E
A B C D F G H I J K
ML
Figure 4 – dCS Encore Front Panel
Key to Front Panel
A Power / Standby button
B Play / Pause button
C Stop / Eject button
D Status indicator
E Digital Input indicator
F Remote Control sensor
G Main Display
H Mode indicator
I Menu or
Select button
J Previous Track / Menu
Step Back button
K Next Track / Menu
Step button
L SACD/CD tray
M Rotary control
Power Button x
This button doubles as a power on / off switch and a standby mode switch.
do this: To switch on, press the Power button briefly. If power is available, the PWR
indicator will light and Verdi Encore will run through the power up routine.
Note that the Power button will not click when turning power on – this is normal.
do this: When you have finished listening, press the Power button briefly to set the unit
to standby mode.
The outputs will mute, all displays will turn off except the PWR indicator. In this
mode, Verdi Encore uses little power. If power is switched off or fails, Standby
mode is cancelled.
do this: To restore normal operation, press the Power button briefly again.
Verdi Encore will power up ready for use.
do this: To switch off completely, press the Power button and hold it for a few seconds
until the Main Display shows Power Off, then release it.