User Guide

dCS Verdi Encore User Manual Manual for Software Issue 1.0x
dCS Ltd August 2005
Manual filename: Verdi Encore Manual v1.0x.doc Page 17 email: [e-mail]
English version web-site: www.dcsltd.co.uk
Menu Sequence
Use the flow chart (Figure 3) or the Control Summary sheet to guide you
through the Menu more quickly.
The following explanation deals with the Menu pages in the sequence they
occur in the Menu
3
. The use of each page is shown on an individual basis, with
the last operation being closing the Menu. After you have become more familiar
with the Menu, you will find it more convenient to perform all the Menu
operations in one go before finally closing the Menu.
3
A minor software update may change the order of the menu items or add an option. If this happens, the
Control Summary sheet may be updated before the manual.
Brightness - Display Brightness
This adjusts the brightness of the main display, with settings between 15
(brightest) and 0 (off, unless something is touched).
do this: Open the Menu and step through until the display shows Brightness: x, where
x is a number between 15 and 0.
do this: Press the
Select button repeatedly and the display cycles through Brightness 0,
Brightness 1, ......., Brightness 14, Brightness 15 and back to Brightness 0.
After time-out, a setting of Brightness 0 blanks the display unless the unit is not
locked. Operating any control or locking to a source while in this mode turns the
display back on momentarily.
Layer (CD, SACD)
Hybrid discs have two layers, an SACD layer and a CD layer. If you are playing
a hybrid disc, this menu setting allows you to choose which layer is played.
Please note the mechanism takes many seconds to reconfigure to a different
layer. The default setting for a hybrid disc is the SACD layer.
IMPORTANT! The Layer feature will be activated in a later software release. The SACD
layer of hybrid discs will be played.
Issue – Software Issue State
This displays the issue number of the software fitted to your unit. You will need
to check this if you are considering a software upgrade or if your unit
malfunctions.
do this: Open the Menu and step through until the display shows Issue: x.xx
1394 Issue – 1394 Interface Software Issue State
This displays the 1394 code version loaded in the 1394 interface.
do this: Open the Menu and step through until the display shows 1394 Issue: x.xx