User Guide

dCS Purcell User Manual Manual for Software Issue 2.2x
dCS Ltd September 2004
Manual filename: Purcell Manual v2.2x.doc Page 33 email: [e-mail]
English version web-site: www.dcsltd.co.uk
Factory
FactoryFactory
Factory – Restoring Factory Defaults
This feature sets most of the parameters back to the factory default settings.
This can be useful if the settings are accidentally changed and you need to
reset the unit to a standard configuration, or your children play with it.
do this: Open the Menu and step through until the display shows Factory.
do this: Press the
Select button and leave the menu to time out.
After re-booting, the unit will return to normal operation set up as follows:
• Input to AES1
• 1394ID to 0
• Output Wordlength to 24 bits
• Noise Shaping to Auto
• Dither to Noise Shaped Triangular
• Output sample rate to DSD if a dCS DAC is detected, otherwise 96kS/s
• Output mode to Dual if a dCS DAC is detected, otherwise Single
• Filters to Filter1
• Clone to NonClone
• De-Emphasis to Strip
• Word Clock to Off
• Display to Fs I+O
• Brightness to Bright4
• Timeout to Normal
• Other settings as you last used them.