User Guide

dCS Purcell User Manual Manual for Software Issue 2.2x
dCS Ltd September 2004
Manual filename: Purcell Manual v2.2x.doc Page 12 email: [e-mail]
English version web-site: www.dcsltd.co.uk
Step 3 – Connecting the Digital Outputs
Choose one of the following three sections:
Connecting a Single AES or SPDIF Output
do this: If the Output Sample Rate is 88.2 or 96kS/s, check that your DAC is capable of
double speed operation.
do this: If you have set Out Mode to Single, connect the required single wire output on
the Purcell rear panel to the matching inputs on the DAC using suitable cables.
Signals are available from any of the AES 1, AES 2, RCA or BNC outputs
simultaneously.
L R
R L
Balanced
Outputs
To Power Amplifier or Preamplifier
Unbalanced
Outputs
- or -
dCS Purcell Upsampler
DIGITAL INPUTS DIGITAL OUTPUTS POWER
1
RCA
BNC
AES RCA
BNC
AES1 AES2
PUSH
SUC
1394
OPTION
TOSLINK
ST A B
IN
WORDCLOCK
OUT
16 bits
44.1kS/s
24/96 DAC
DIGITAL OUT
L
R
Hand Crafted by
The Red Hot CD Player Co.
WORD CLK IN
ANALOGUE OUTPUTS DIGITAL INPUTS POWER
IN - WORDCLOCK - OUT
BNC
RCA1
TOSLINK
AES1 AES2
PUS H
L R
L
R RCA2
ST
PUSH
DIGITAL OUT
REC
1
SUC
1394
24 bits
96kS/s
Figure 1 – Upsampling to 24/96 single wire