User Guide

dCS Elgar Plus User Manual Manual for Software Issue 4.3x
dCS Ltd September 2004
Manual filename: Elgar Manual v4.3x.doc Page 5 email: [e-mail]
English version web-site: www.dcsltd.co.uk
CDUpdate – Software Update By CD 29
Factory – Restoring Factory Defaults 32
Rst Sync – Setting all Inputs to Slave Mode 32
The Hardware – Controls and Connectors ...................................................34
Front Panel 34
Key to Front Panel 34
Standby Button x 34
Display button (Menu
Step)35
Phase button x 35
De-Emphasis button x 35
Status Indicator x 36
Remote Control Sensor x 36
Main Display x 36
Input Button and Input Indicator x 37
Mute Button x 37
Volume / Balance button (Menu
Select)37
Rotary Control x 37
Rear Panel 38
Key to Rear Panel 38
Output Level Switch 38
Balanced Analogue Outputs 39
Unbalanced Analogue Outputs 39
AES/EBU Digital Inputs 39
SPDIF Digital Inputs 39
Toslink and ST Optical Inputs 39
REC Digital Output 40
1394 Interface 40
DSD / SDIF Interface 40
Wordclock Digital Output 41
SUC 41
IEC Power Inlet 41
Mains Fuse 41
Additional Information 41
Remote Control 42
Standby Button 42
Function Button 42
Input Selector Buttons 43
Vol/Bal Button 43
Mute Button 43
Purcell Button and LED 43
Phase Button 43
Filter Button 43
Display button 43
Up and Down (
↑ / ↓) buttons 43
Elgar Plus Technical Information ....................................................................44
Converter Type 44
Digital Interface Specifications 44
Sample Rates 45
Frequency Response (set to Filter 1) 45
Volume Control 46
Balance Control 46
De-Emphasis 46
Analogue Outputs 46
Clocking 46
Synchronising to source x 46
Power requirements 47
Size and Weight 47
Operating Conditions 47
General Technical Information.......................................................................48
IEEE 1394 Overview 48
Synchronising IEEE 1394 interfaces 48
Automatic Input Selection 48
dCS IR Remote Control Codes 50
Upsampler 50