User Guide

dCS Elgar Plus User Manual Manual for Software Issue 4.3x
dCS Ltd September 2004
Manual filename: Elgar Manual v4.3x.doc Page 24 email: [e-mail]
English version web-site: www.dcsltd.co.uk
Swap
SwapSwap
Swap - Swap Channels
If you have run the Channel Check test and decided the channels are reversed,
you can swap the channels back digitally as follows.
do this: Assuming the unit is set for swap off, open the Function Menu and step through
until the display shows Swap:Off.
do this: Press the
Select button once.
The display will change to Swap:On.
do this: Run through this sequence again if you want to swap back.
The Swap setting is NOT remembered when you switch off. If your channels are
swapped, check the wiring between units and correct the error.
Disp
DispDisp
Disp - Default Display
This feature allows you to choose what Elgar Plus displays when music is
playing
do this: Open the Function Menu and step through until you come to the Disp page.
Press the
Select button repeatedly and the display will cycle through the
following :
Disp:Vol The display reverts to Volume after time-out (e.g.
Vol -12.0).
Disp:Fs The display reverts to Sample Rate after time-out (e.g.
44.1kS/s).
Disp:Fs+ The display reverts to Input Bits + Sample Rate (format)
after time-out (e.g. 24/192). If receiving digital silence, 0
input bits will be correctly displayed.
Disp:Inp The display reverts to the selected input after time-out
(e.g. AES1).
do this: Choose whichever you prefer and wait for time-out.
Bal Mode
Bal ModeBal Mode
Bal Mode - Balance Information Display
Use this to select one of two types of balance display.
do this: Open the Function Menu and step through until the display shows Bal:Bar or
Bal:Num.
do this: Press
Select to change between the two.
Bal:Bar displays the channel balance as two bars, this may be easier to read
from a distance:
▌▌▌▌▐▐▐▐ Balance Central
▌▌▌▌ Balance to left
▐▐▐▐ Balance to right
Bal:Num displays channel balance as two percentages:
100% 100% Balance central
100% 0% Balance to left
0% 100% Balance to right