User Guide

dCS Delius User Manual Manual for Software Issue 2.3x
dCS Ltd September 2004
Manual filename: Delius Manual v2.3x.doc Page 28 email: [e-mail]
English version web-site: www.dcsltd.co.uk
do this: Press the Select button repeatedly. The display will cycle through the options.
When you reach the required setting, wait for time-out or move on through the
menu.
Usually, it is most convenient to use Auto mode. If the de-emphasis flag is
wrong, this can be corrected manually using the other 3 settings.
Balance
BalanceBalance
Balance - Channel Balance Using Rotary Knob
This allows you to adjust the Left / Right Balance to centre the stereo image
using the Rotary Control.
do this: Open the Function Menu and step through until the display shows Balance.
do this: Press the
Select button once.
The display will change to either two percentages (Left and Right levels) or a
bargraph type display, depending on the Balance Mode setting.
do this: Adjust the balance with the Rotary control.
After the Menu has timed out, the Rotary control reverts to Volume adjustment.
It is usually more convenient to adjust the Balance from the listening position
using the Remote Control, see Vol/Bal button on page 44.
Bal Mode
Bal ModeBal Mode
Bal Mode - Balance Information Display
Use this to select one of two types of balance display.
do this: Open the Function Menu and step through until the display shows Bal:Bar or
Bal:Num.
do this: Press
Select to change between the two.
Bal:Bar displays the channel balance as two bars, this may be easier to read
from a distance:
▌▌▌▌▐▐▐▐ Balance Central
▌▌▌▌ Balance to left
▐▐▐▐ Balance to right
Bal:Num displays channel balance as two percentages:
100% 100% Balance central
100% 0% Balance to left
0% 100% Balance to right
Global
GlobalGlobal
Global – Global/Local Volume
Delius can store Volume settings in two ways:
• Applying the same Volume setting to all inputs (Global volume).
• Using different settings for each input (Local volume, or Input specific). This
is useful where the average loudness (and so the preferred Volume setting)
changes from source to source.
To change this setting:
do this: Open the Function Menu and step through until you reach the Vol page. The
display shows Vol:Glob or Vol:Inp.
do this: Press the
Select button to choose one of these settings and wait for time out.