User Guide

dCS Delius User Manual Manual for Software Issue 2.3x
dCS Ltd September 2004
Manual filename: Delius Manual v2.3x.doc Page 20 email: [e-mail]
English version web-site: www.dcsltd.co.uk
THE SOFTWARE – THE MENU
Press "Function Step >" to move along the Menu, press "< Function Step" to move back.
Press "Function Select" to set a menu option or change options.
Menu Filter x Master/Slave Mute: Fade Dual AES
First page of the
Menu
Selects an optional
filter if available
Changes the
behaviour of the
selected input
Sets the Mute fade-
out rate
Audio fades up
during unmuting
after relock
Enables Dual AES
operation
Filter 1 MS:Mast Mute:Nor Fade:On Off
Filter 2 MS:Slav Mute:Fst Fade:Off On
.... MS:Sync Mute:Slw Auto
Filter n Lock
De Emph Phase Bright x Out Disp Swap
Sets the
DeEmphasis curve
(32 - 48kS/s)
Chan
g
es the output
phase for both
channels
Sets the display
brightness
Sets the analogue
output levels
Sets the default
display
Reverse the Left
and Right outputs
Off Phse:Nor Bright 7 Out: 2V Disp:Vol Swap:Off
Auto Phse:Inv .... Out: 6V Disp:Fs Swap:On
50/15us Bright 0 Disp:Fs+
CCITT Disp:Inp
Balance Bal mode Global TimeOut PLL NAud
Allows Balance
adjustment by
rotary control
Sets the balance
display mode
Stores global or
input-related
settings
Sets the Function
Menu time-out
delay
Sets the PLL
tracking bandwidth
Controls muting
when receivin
g
non
-
audio data
(
e.
g
. CD
-
ROM)
Bal:Bar Vol:Glob Normal PLL:Fine NAud:Mut
Bal:Num Vol:Inp Long PLL:Wide NAud:Ign
Use with care!
Temp Issue Test Burn In Ph.Check Ch.Check
Displays the
internal
temperature
Displays the
software version
number
Runs a display test
routine
Outputs modulated
pink noise to burn-
in your system
Outputs noise on
both channels then
inverts R
Outputs tone on L
channel onl
y
then R
channel only
CAUTION! LOUD!
Celsius 2.3x
Fahrenheit Db 2.06
Serial Contact CDUpdate Factory Rst Sync End
Displays the unit
full serial number
Displa
y
s dCS email
address
Starts software
update from a dCS
CD
Restores standard
factory settings
Resets all inputs to
Slave mode
Closes the Function
Menu
DEL-?-?-?-?-?
xx
x
= feature is not available in DSD mode
Figure 6 – Function Menu flow chart