Installation Sheet

Fisher & Paykel Appliances, Inc.
5900 Skylab Road, Huntington Beach, CA 92647
Customer Care: 888.281.5698 • Fax: [phone]
www.dcsappliances.com
P/N 242803 RA
Attach the legs to the backs of the bend units using the provided mounting screws (#10-24 x 1/2” Phillips 3.
Machine Screws). Position the legs on the bend units so that the screws are fed through the outer holes
on the bracket legs (Fig. 04).
Once the legs are securely mounted to the bend units, place the large 4. bracket top on top of the legs
(Fig. 05). The bracket top should rest safely on the legs while you secure the parts together.
Note: DO NOT place any weight on the shelf until step 5 is complete.
With the large 5. bracket top in place, secure the bracket top to the bracket legs using the hex bolt (1/4-20 x
3/4”), the washers (5/16 x 3/4 ) and hex nuts (1/4-20); bolt through the protruding plates on the legs, into
the bracket top (Fig. 05). Once secure, the solid surface can then be placed on the bend corner bracket.
Fig. 04
Fig. 05
ACCESSORIES REQUIRED:
Solid Surface for Corner Shelf (BND-CNRT) ■
For alternate types and/or colors of solid surface, contact your local manufacturer and provide the attached
drawing (Fig. 06).
43.42”
.50”
ALL WALLS
R .250 ON ALL CORNERS
AND TOP EDGES
30.85”
90.00°
45.00°
C
L
SYMM
*1.30”
61.19”
*
DIMENSIONS ARE CRITICAL
Fig. 06
CAD-30
(center)
Bend Unit