User guide

P5040 DS Hardware Getting Started, Rev. 1.5

40 Freescale Semiconductor

HW Getting Started Procedures

12.2 PC Mid-Tower Mode

Table 12 outlines activation steps for a PC Mid-Tower unit.

Table 12. Getting Started Procedure: PC Mid-Tower Mode

Getting Started Procedure: PC Mid-Tower

Step 1:

Attach country-specific wall outlet plug to the primary power

cable.

Step 2:

Connect power cable to back of Mid-Tower unit.

Step 3:

Connect RS-232 cable to DB9 Cross Gender at J5-Bottom.

Step 4a:

Connect cross-over cable between P1–GETH2 and

J2-Top–GETH1.

Step 4b:

Connect shielded cable at P1–GETH2 and/or

J2-Top–GETH1.

Step 5:

Connect USB*A-to-MicroUSB*B cable to J2-Bottom–USB1

(Host).

Step 6:

Connect MicroUSB*A-to-USB*A adapter to J1–USB2 (OTG).

Step 7:

Set the power switch located on the back of the Mid-Tower to

ON; it can remain in this position.

Step 7

Step 5

Step 3

Step 4a

Step 2

Step 6

Step 4a Step 4b