User guide

P5040 DS Hardware Getting Started, Rev. 1.5
Freescale Semiconductor 35
LED Lights
D12 Green STAT5 • Reset: lighted if OCM
initialization fails
• Normal operation: lighted if
register bit PX_LED[5]=’1’
• Register bit PX_LED[5]=’0’
D13 Green STAT6 • Reset lighted if FPGA OCM is
clocked
• Normal operation: lighted if
register bit PX_LED[6]=’1’
• Register bit PX_LED[6]=’0’
D14 Green STAT7 • Flashes when FPGA is clocked
• Normal operation: lighted if
register bit PX_LED[7]=’1’
• Register bit PX_LED[7]=’0’
D15 Green VDD_CB_PG • Power Good: VDD_CB • Failed: VDD_CB Power
D16 Green VDD_PL_PG • Power Good: VDD_PL • Failed: VDD_PL Power
D17 Green VDD_CA_PG • Power Good: VDD_CA • Failed/OFF for P3041: VDD_CA Power
D18 Green HOT_3V3 • Power Good: HOT_3V3 • Failed: HOT_3V3 Power
D19 Green VDD_GVDD_PG • Power Good: VDD_GVDD • Failed: VDD_GVDD Power
D20 Green PRELOAD • ON: PRELOAD • OFF: PRELOAD status
D21 Green 3V3 • ON: 3.3V voltage supply • OFF: 3.3V voltage supply
D22 Green 2V5LVDD • ON: 2.5V LVDD voltage supply • OFF: 2.5V LVDD voltage supply
D23 Green 1V2GETH • ON: 1.2V GETH PHY Core
voltage supply
• OFF: 1.2V GETH PHY Core voltage
supply
D24 Green 1V8 • ON: 1.8V voltage supply • OFF: 1.8V voltage supply
D25 Green 1V5POVDD • ON: 1.5V POVDD voltage
supply
• OFF: 1.5V POVDD voltage supply
D26 Green XVDD • ON: XVDD voltage supply • OFF: XVDD voltage supply
D27 Green 3V3USB • ON: 3.3V USB voltage supply • OFF: 3.3V USB voltage supply
D28 Green 1V0USB • ON: 1.0V USB voltage supply • OFF: 1.0V USB voltage supply
D29 Green HOT_5V • ON: HOT_5V voltage supply • OFF: HOT_5V voltage supply
D30 Green PIX • ON: FPGA OCM • OFF: FPGA OCM
D35 Green PS_CA_AMD
MODE
• ON: PS_CA in AMD 5-bit mode • OFF: PS_CA in Intel VR11 mode
D36 Green/
Red
PS_CA_PROG_
CNTR
• Green: Voltage set by SW12
• Red: Voltage set by I2C1 bus
• OFF: Power OFF
D37 Green PS_PL_AMD
MODE
• ON: PS_PL in AMD 5-bit mode • OFF: PS_PL in Intel VR11 mode
Table 9. P5040 DS (SuperHYDRA) LEDs
LED Color Name LED ON LED OFF