User guide

P5040 DS Hardware Getting Started, Rev. 1.5
30 Freescale Semiconductor
Connector Default Settings
J29 AURORA AURORA Socket 2x35-pin
External AURORA cable
connection
J30 DDR3 DIMM1
DDR3 uDIMM
Socket
240-pin
uDIMM-2GB 72bit (with ECC)
1600Mbps Dual Rank
inserted
[For P3041/P5020/P5040]
J31 DDR3 DIMM2
DDR3 uDIMM
Socket
240-pin
uDIMM-2GB 72bit (with ECC)
1600Mbps Dual Rank
inserted
[Not Used for P3041]
J32 CPU FAN Header 1x3-pin 12V FAN
J33
I
2
C1 isolated bus remote
programmer
Header 1x3-pin
External I
2
C1 remote
programmer connection
J34 I
2
C4 bus remote programmer Header 1x3-pin
External I
2
C4 remote
programmer connection
J35 12V Header 1x2-pin Not assembled
J36 1588 riser card Header 2x30-pin
External 1588 riser card
connection
J39 JTAG/COP Header 2x8-pin External USB-TAP connection
J40 PROMJet Header 2x25-pin
External PROMJet Flash
emulator connection
J41 ATX-PS 12V2 Connector 2x2-pin
External ATX-PS 12V
connection
J42 Chassis power LED Header 1x3-pin
PC box chassis power
(VCC_3V3) LED connection
J43 ATX-PS Connector 2x12-pin External ATX-PS connection
J45 System test Header 1x2-pin
• Voltage monitor service
disconnection.
• Not assembled
J46
I
2
C1 Zilker converters remote
programmer
Header 1x3-pin
External I
2
C1 remote
programmer connection
J48 Chassis power LED Header 1x3-pin
PC box chassis power
(VCC_HOT3V3) LED
connection
J49 Chassis reset LED Header 1x3-pin
PC box chassis reset LED
connection
J50 Flash FPGA programming Header 2x5-pin [Default] OPEN
J51 TRIG_OUT SMA COAX — [Default] OPEN
J52 TRIG_IN SMA COAX — [Default] OPEN
Table 6. P5040 DS (SuperHYDRA) Connector Default Settings
Connector Name/Function Type Features Description