User guide

P5040 DS Hardware Getting Started, Rev. 1.5
Freescale Semiconductor 15
Switch Default Settings
SW1.6: DRAM_TYPE
(DDR RAM Type)
Defines POR DRAM type (DDR3/DDR3L).
• ‘0’ - 1.5V DDR3 technology [Default]
• ’1’ - 1.35V DDR3L technology
SW1.7: RSP_DIS
(Response Disable)
Defines functionality.
• ‘0’ - RESET pauses at RCW
• ’1’ - Continued Boot [Default]
SW1.8: eLBC_ECC
(Enhanced Local Bus Controller & Error Detection and Correction)
Controls FCM ECC functionality.
• ‘0’ - Disabled NAND Flash ECC [Default]
• ’1’ - Enabled NAND Flash ECC