Technical data

Network OS Message Reference 65
53-1002489-01
FVCS-2005
11
FVCS-2005
Message <timestamp>, [FVCS-2005], <sequence-number>,, WARNING, <switch-name>, FCS Cancel
stage Failed - cfg type <Configuration Type>, cfg tag <Configuration Tag>, domain
<Source Domain>, reason (<Failure Reason Code>).
Probable Cause Indicates that the FCS cancel stage has failed. The failure reason can be one of the following:
• 7 - Memory allocation error
• 14 - Reliable Transport Write and Read (RTWR) send failure
Recommended
Action
Check the status of the vLAG identified by the configuration tag.
If the message persists, execute the copy support ftp command on this rBridge and the remote
rBridge specified in the domain field and contact your switch service provider.
Severity WARNING
FVCS-2006
Message <timestamp>, [FVCS-2006], <sequence-number>,, WARNING, <switch-name>, FCS
Transaction Hung - cfg type <Configuration Type>, cfg tag <Configuration Tag>,
trans state<Trans State>.
Probable Cause Indicates that the update cannot be completed for an unknown reason.
Recommended
Action
Check the status of the vLAG identified by the configuration tag.
If the message persists, execute the copy support ftp command and contact your switch service
provider.
Severity WARNING
FVCS-3001
Message <timestamp>, [FVCS-3001], <sequence-number>,, WARNING, <switch-name>, Eth_ns
Message Queue Overflow. Failed to send update. MAC or MCAST Database may be out of
sync. Drop count = (<Drop Count>).
Probable Cause Indicates that the Eth_ns (component of FVCS), that kept the MCAST and L2 databases in sync,
cannot send an update to the remote rBridges because its internal message queue is full. This
error is due to a temporary congestion issue on the local rBridge.
Recommended
Action
The rBridge must leave and rejoin the fabric for synchronization of the MCAST and L2 databases.
Severity WARNING