Manualshelf

Technical data

ManualsBrandsDcm ManualsComputer equipmentDCM1212
81828384858687888990
56 Network OS Message Reference
53-1002489-01
FABR-1039
9
Recommended
Action
No action is required.
Severity INFO
FABR-1039
Message <timestamp>, [FABR-1039], <sequence-number>,, WARNING, <switch-name>, Invalid
rBridge ID zero received from principal switch (rBridge ID=<Principal rBridge
id>).
Probable Cause Indicates that an invalid rBridge ID zero has been received.
Recommended
Action
Check the reason for the principal switch to assign an invalid rBridge ID zero.
Severity WARNING
FABR-1041
Message <timestamp>, [FABR-1041], <sequence-number>,, ERROR, <switch-name>, Port <Port
that is being disabled> is disabled due to trunk protocol error.
Probable Cause Indicates a link reset was received before the completion of the trunking protocol on the port.
Recommended
Action
Toggle the port using the no fabric isl enable and fabric isl enable commands.
The port may recover by re-initialization of the link.
If the message persists, run the copy support command and contact your switch service provider.
Severity ERROR