Technical data

Network OS Message Reference 53
53-1002489-01
FABR-1008
9
FABR-1008
Message <timestamp>, [FABR-1008], <sequence-number>,, WARNING, <switch-name>, <error
description>.
Probable Cause Indicates that errors occurred during the request rBridge ID state; the information unit (IU) cannot
be allocated or sent. If this message occurs with FABR-1005, the problem is usually transitory.
Otherwise, this message is rare and usually indicates a problem with the Network OS. The error
descriptions are as follows:
• FAB RDI: cannot allocate IU
• FAB RDI: cannot send IU
Recommended
Action
No action is required if the message appears with the FABR-1005 message.
If the message persists, run the copy support command and contact your switch service provider.
Severity WARNING
FABR-1009
Message <timestamp>, [FABR-1009], <sequence-number>,, WARNING, <switch-name>, <error
description>.
Probable Cause Indicates that errors were reported during the exchange fabric parameter (EFP) state; cannot
allocate rBridge IDs list due to a faulty EFP type. This message is rare and usually indicates a
problem with the Network OS.
Recommended
Action
The fabric daemon will discard the EFP. The system will recover through the EFP retrial process.
If the message persists, run the copy support command and contact your switch service provider.
Severity WARNING
FABR-1010
Message <timestamp>, [FABR-1010], <sequence-number>,, WARNING, <switch-name>, <error
description>.
Probable Cause Indicates that errors occurred while cleaning up the RDI (request rBridge ID). The error description
provides further details. This message is rare and usually indicates a problem with the Network OS.
Recommended
Action
If the message persists, run the copy support command and contact your switch service provider.
Severity WARNING