Technical data

52 Network OS Message Reference
53-1002489-01
FABR-1005
9
If the message persists, run the copy support command and contact your switch service provider.
Severity WARNING
FABR-1005
Message <timestamp>, [FABR-1005], <sequence-number>,, WARNING, <switch-name>, <command
sent>: port <port number>: status 0x<reason for failure> (<description of failure
reason>) xid = 0x<exchange ID of command>.
Probable Cause Indicates that the application failed to send an async command for the specified port. The
message provides additional details regarding the reason for the failure and the exchange ID of the
command. This can happen if a port is about to go down.
Recommended
Action
This message is often transitory. No action is required.
If the message persists, run the copy support command and contact your switch service provider.
Severity WARNING
FABR-1006
Message <timestamp>, [FABR-1006], <sequence-number>,, WARNING, <switch-name>, Node free
error, caller: <error description>.
Probable Cause Indicates that the Network OS is trying to free or deallocate memory space that has already been
deallocated. This message is rare and usually indicates a problem with the Network OS.
Recommended
Action
If the message persists, run the copy support command and contact your switch service provider.
Severity WARNING
FABR-1007
Message <timestamp>, [FABR-1007], <sequence-number>,, WARNING, <switch-name>, IU free
error, caller: <function attempting to de-allocate IU>.
Probable Cause Indicates that a failure occurred when deallocating an information unit (IU). This message is rare
and usually indicates a problem with the Network OS.
Recommended
Action
If the message persists, run the copy support command and contact your switch service provider.
Severity WARNING