Technical data

40 Network OS Message Reference
53-1002489-01
EANV-1004
6
EANV-1004
Message <timestamp>, [EANV-1004], <sequence-number>,, ERROR, <switch-name>, S<slot
number>,C<chip index>: Invalid DMA ch pointer, chan: <Channel number>,
good_addr:0x<Good address> bad_addr:0x<Bad address>.
Probable Cause Indicates an internal error in the application-specific integrated circuit (ASIC) hardware that may
degrade data traffic.
Recommended
Action
When this error occurs, reboot the system at the next maintenance window.
Severity ERROR
EANV-1005
Message <timestamp>, [EANV-1005], <sequence-number>,, ERROR, <switch-name>, S<slot
number>,C<chip index>, A<eanvil id>: Memory allocation failed.
Probable Cause Indicates memory allocation failure in the software.
Recommended
Action
When this error occurs, reboot the system at the next maintenance window. If the problem persists,
replace the switch or contact your switch service provider.
Severity ERROR
EANV-1006
Message <timestamp>, [EANV-1006], <sequence-number>,, CRITICAL, <switch-name>, S<slot
number>,C<chip index>: HW ASIC Chip fault. Type = 0x<chip error type>, Error =
<chip error string>.
Probable Cause Indicates an internal error in the application-specific integrated circuit (ASIC) hardware that renders
the chip not operational.
Recommended
Action
When this error occurs, reboot the system at the next maintenance window. If the problem persists,
replace the switch or contact your switch service provider.
Severity CRITICAL