Manualshelf

Technical data

ManualsBrandsDcm ManualsComputer equipmentDCM1212
51525354555657585960
Network OS Message Reference 23
53-1002489-01
AUTH-1042
2
If the message persists, execute the copy support command and contact your switch service
provider.
Severity ERROR
AUTH-1042
Message <timestamp>, [AUTH-1042], <sequence-number>,, ERROR, <system-name>, Port <port
number> has been disabled, because authentication failed with code '<Reason
String>' and explanation '<Explanation String>'.
Probable Cause Indicates that the specified port has been disabled, because the connecting switch or device failed
to authenticate. The error may indicate that an invalid entity attempted to connect to the switch.
Recommended
Action
Check the connection port for a possible security attack.
Check the shared secrets using the fcsp auth-secret command and reinitialize authentication using
the shutdown and no shutdown commands.
If the message persists, execute the copy support command and contact your switch service
provider.
Severity ERROR