Technical data

Network OS Message Reference 21
53-1002489-01
Chapter
2
AUTH System Messages
AUTH-1001
Message <timestamp>, [AUTH-1001], <sequence-number>,, INFO, <system-name>, <Operation
type> has been successfully completed.
Probable Cause Indicates that the secret database operation has been updated using the fcsp auth-secret or no
fcsp auth-secret command. The values for Operation type can be “set” or “remove”.
Recommended
Action
No action is required.
Severity INFO
AUTH-1002
Message <timestamp>, [AUTH-1002], <sequence-number>,, ERROR, <system-name>, <Operation
type>
has failed.
Probable Cause Indicates that the specified action has failed to update the secret database using the fcsp
auth-secret or no fcsp auth-secret command. The values for Operation type can be “set” or
“remove”.
Recommended
Action
Retry the fcsp auth-secret command.
Run the copy support command and contact your switch service provider.
Severity ERROR
AUTH-1010
Message <timestamp>, [AUTH-1010], <sequence-number>,, ERROR, <system-name>, Failed to
initialize security policy: switch <switch number>, error <error code>.
Probable Cause Indicates an internal problem with the Secure Network OS.
Recommended
Action
Reboot or power cycle the switch.
If the message persists, run the copy support command and contact your switch service provider.
Severity ERROR