Technical data

Network OS Message Reference 9
53-1002489-01
Viewing and clearing RASLog messages
1
engineid 80:00:05:23:01:AC:1A:01:79
severity-level Info
!
Viewing and clearing RASLog messages
This section provides information on viewing and clearing the system message logs.
Displaying the RASLog messages
To display the saved RASLog system error messages, perform the following steps.
1. Log in to the switch as admin.
2. Enter the show logging raslog command at the command line.
switch# show logging raslog
NOS: v2.1.1
2011/09/14-04:52:05, [LOG-1003], 1,, INFO, VDX6720-60, The error log has been
cleared.
2011/09/14-04:56:18, [DCM-1101], 2,, INFO, VDX6720-60, Copy running-config to
startup-config operation successful on this node.
2011/09/14-04:58:25, [SULB-1001], 3,, WARNING, VDX6720-60, firmware download
command has started.
2011/09/14-05:05:21, [SULB-1002], 4,, INFO, VDX6720-60, firmware download
command has completed successfully.
2011/09/14-05:05:21, [RAS-1007], 5,, INFO, VDX6720-60, System is about to
reboot.
2011/09/14-05:10:14, [HAM-1004], 6,, INFO, VDX6720-60, Processor rebooted -
FirmwareDownload.
Clearing the RASLog messages
To clear the RASLog messages for a particular switch instance, perform the following steps.
1. Log in to the switch as admin.
2. Execute the clear logging raslog command to clear all messages from the switch.
NOTE
The clear logging raslog command clears all the VCS RASLog messages on the local switch and
does not affect the other nodes in the cluster.