Technical data

Network OS Message Reference 227
53-1002489-01
SULB-1010
46
SULB-1010
Message <sequence-number> AUDIT, <timestamp>, [SULB-1010], INFO, FIRMWARE, <User
ID>/<Role>/<IP address>/<Interface>/<app name>,, <switch-name>, firmware commit
failed (status=0x <error code>).
Probable Cause Indicates that the firmware commit command has failed. The error code provides debugging
information. Refer to the Status messages and status codes table in the SULB-1009 message for
more information.
Recommended
Action
If the failure is caused by an inconsistent filesystem, contact your switch service provider.
Severity INFO
SULB-1037
Message <sequence-number> AUDIT, <timestamp>, [SULB-1037], ERROR, FIRMWARE, <User
ID>/<Role>/<IP address>/<Interface>/<app name>,, <switch-name>, Hot Code Load
(HCL) failed.
Probable Cause Indicates that the Hot Code Load (HCL) has failed. Many reasons, such as domain not confirmed,
can cause this failure.
Recommended
Action
Execute the reboot command to reboot the switch manually. However, it will disrupt the FC traffic.
Severity ERROR