Technical data

Network OS Message Reference 225
53-1002489-01
SULB-1009
46
Table 10 lists additional firmware download error messages and error codes. They provide more
details on why firmware download failed.
"Blade has rebooted successfully." 0xa5
“New firmware failed to boot up. Retry the firmware download.” 0xa6
“firmware commit has started on the blade. This may take up to 10 minutes.” 0xa7
“The firmware restore command is executed. System will reboot and a firmware commit
operation will start upon bootup.”
0xa8
"Switch is relocating the AP image." 0xa9
"The AP image is relocated successfully." 0xaa
"Switch reboots during relocating the AP image. The operation will be restarted." 0xab
“Blade failed to reboot with the original image. The firmware restore command failed.” 0xac
TABLE 10 Error messages and error codes
Error message Error code
"Image is up-to-date. No need to download the same version of firmware." 0xF
“Upgrade is inconsistent.” 0x10
“OSRootPartition is inconsistent.” 0x11
“Unable to access the required package list file. Check whether the switch is supported by the
requested firmware. Also check firmware download help page for other possible failure
reasons.”
0x12
"The RPM package database is inconsistent. Contact your service provider for recovery." 0x13
"Out of memory." 0x14
“Failed to download Red Hat package manager (RPM) package.” 0x15
"Unable to create firmware version file." 0x16
"Unexpected system error." 0x17
“Error in getting lock device for firmware download.” 0x18
“Error in releasing lock device for firmware download.” 0x19
“firmware commit failed.” 0x1a
"Firmware directory structure is not compatible. Check whether the firmware is supported on
this platform."
0x1b
"Failed to load the Linux kernel image." 0x1c
“OSLo ad er is inconsistent.” 0x1d
“New image has not been committed. Execute the firmware commit or firmware restore
command and then execute the firmware download command.”
0x1e
“firmware restore failed.” 0x1f
"Both images are mounted to the same device." 0x20
“Unable to unionist old packages.” 0x21
“firmware download is already in progress.” 0x22
TABLE 9 Status messages and status codes (Continued)
Status message Status code