Technical data

Network OS Message Reference 221
53-1002489-01
Chapter
46
AUDIT SULB System Messages
SULB-1001
Message <sequence-number> AUDIT, <timestamp>, [SULB-1001], WARNING, FIRMWARE, <User
ID>/<Role>/<IP address>/<Interface>/<app name>,, <switch-name>, firmware download
command has started.
Probable Cause Indicates that the firmware download command has been executed. This process takes about 17
minutes to complete. The process is set to time out after 30 minutes.
Recommended
Action
Do not fail over or power down the system during the firmware upgrade. Allow the firmware
download command to continue without disruption. No action is required.
Execute the show firmwaredownloadstatus command for more information.
Severity WARNING
SULB-1002
Message <sequence-number> AUDIT, <timestamp>, [SULB-1002], INFO, FIRMWARE, <User
ID>/<Role>/<IP address>/<Interface>/<app name>,, <switch-name>, firmware download
command has completed successfully.
Probable Cause Indicates that the firmware download command has completed successfully and the switch
firmware has been updated.
Recommended
Action
No action is required. The firmware download command has completed as expected.
Execute the show firmwaredownloadstatus command for more information. Execute the show
version command to verify the firmware version.
Severity INFO
SULB-1003
Message <sequence-number> AUDIT, <timestamp>, [SULB-1003], INFO, FIRMWARE, <User
ID>/<Role>/<IP address>/<Interface>/<app name>,, <switch-name>, firmware commit
has started.
Probable Cause Indicates that the firmware commit command has been executed.
Recommended
Action
No action is required. Execute the show firmwaredownloadstatus command for more information.
Severity INFO