Technical data

216 Network OS Message Reference
53-1002489-01
SEC-3044
44
SEC-3044
Message <sequence-number> AUDIT, <timestamp>, [SEC-3044], INFO, SECURITY, <User
ID>/<Role>/<IP address>/<Interface>/<app name>,, <switch-name>, The FIPS mode has
been changed to <Fips Mode>.
Probable Cause Indicates there was a change in the FIPS mode.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
SEC-3045
Message <sequence-number> AUDIT, <timestamp>, [SEC-3045], INFO, SECURITY, <User
ID>/<Role>/<IP address>/<Interface>/<app name>,, <switch-name>, Zeroization has
been executed on the system.
Probable Cause Indicates the system has been zeroized.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
SEC-3046
Message <sequence-number> AUDIT, <timestamp>, [SEC-3046], INFO, SECURITY, <User
ID>/<Role>/<IP address>/<Interface>/<app name>,, <switch-name>, The FIPS Self
Tests mode has been set to <Self Test Mode>.
Probable Cause Indicates there was a change in the FIPS Self Test mode.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
SEC-3048
Message <sequence-number> AUDIT, <timestamp>, [SEC-3048], INFO, SECURITY, <User
ID>/<Role>/<IP address>/<Interface>/<app name>,, <switch-name>, FIPS mode has
been enabled in the system using force option.
Probable Cause Indicates the system has been forced to FIPS mode.