Manualshelf

Technical data

ManualsBrandsDcm ManualsComputer equipmentDCM1212
231232233234235236237238239240
Network OS Message Reference 201
53-1002489-01
ZONE-1045
41
Recommended
Action
Verify that this Default Zone access mode change was done on purpose.
Severity INFO
ZONE-1045
Message <timestamp>, [ZONE-1045], <sequence-number>,, INFO, <switch-name>, The Default
Zone access mode is already set to No Access.
Probable Cause Indicates that the Default Zone access mode is already set to No Access.
Recommended
Action
No action is required.
Severity INFO
ZONE-1046
Message <timestamp>, [ZONE-1046], <sequence-number>,, INFO, <switch-name>, The Default
Zone access mode is already set to All Access.
Probable Cause Indicates that the Default Zone access mode was already set to All Access.
Recommended
Action
No action is required.
Severity INFO
ZONE-1047
Message <timestamp>, [ZONE-1047], <sequence-number>,, INFO, <switch-name>, Switch rBridge
(<rBridger>) does not support defined database.
Probable Cause Indicates that a remote Brocade switch is running a lower version of the Network OS that does not
support the defined database.
Recommended
Action
It is recommended to upgrade all switches to the same release version.
Severity INFO