Technical data

200 Network OS Message Reference
53-1002489-01
ZONE-1041
41
Recommended
Action
Reduce the size of the zone database and retry the operation.
Severity INFO
ZONE-1041
Message <timestamp>, [ZONE-1041], <sequence-number>,, WARNING, <switch-name>, Unstable
link detected during merge at port (<Port number>).
Probable Cause Indicates a possible unstable link or a faulty cable.
Recommended
Action
Verify that the small form-factor pluggable (SFP) and cable at the specified port are not faulty.
Replace the SFP and cable if necessary.
Severity WARNING
ZONE-1042
Message <timestamp>, [ZONE-1042], <sequence-number>,, INFO, <switch-name>, The effective
configuration has been disabled. <AD Id>.
Probable Cause Indicates that the effective zone configuration has been disabled.
Recommended
Action
Verify that the zone configuration change was done on purpose. If the effective zone configuration
is not needed, no action is required.
Severity INFO
ZONE-1043
Message <timestamp>, [ZONE-1043], <sequence-number>,, INFO, <switch-name>, The Default
Zone access mode is set to No Access.
Probable Cause Indicates that the Default Zone access mode is set to No Access.
Recommended
Action
Verify that this Default Zone access mode change was done on purpose.
Severity INFO
ZONE-1044
Message <timestamp>, [ZONE-1044], <sequence-number>,, INFO, <switch-name>, The Default
Zone access mode is set to All Access.
Probable Cause Indicates that the Default Zone access mode is set to All Access.