Technical data

Network OS Message Reference 189
53-1002489-01
Chapter
40
VCS System Messages
VCS-1001
Message <timestamp>, [VCS-1001], <sequence-number>, VCS, INFO, <switch-name>, Event: VCS
cluster create, Coordinator IP: <Co-ordinator's Public IP>, VCS ID: <VCS Id>,
Status: <Cluster status>.
Probable Cause Indicates that the Virtual Cluster Switch (VCS) cluster is created in the following:
• Distributed Configuration Manager (DCM): The initial VCS enable and configuration distribute
on two or more nodes where a VCS cluster of the same VCS ID did not exist before.
• Fabric Distribution Service (FDS): The initial VCS enable on two or more nodes with the same
VCS ID where a VCS cluster of the same VCS ID did not exist before.
Recommended
Action
No action is required.
Severity INFO
VCS-1002
Message <timestamp>, [VCS-1002], <sequence-number>, VCS, ERROR, <switch-name>, Event: VCS
cluster create, Coordinator IP: <Co-ordinator's Public IP>, VCS ID: <VCS Id>,
Status: VCS cluster failed to be created, Reason: <Error Reason>.
Probable Cause Indicates that the VCS cluster failed to be created. Refer to the reason code for the cause of the
error.
Recommended
Action
Refer to reason code for possible action.
Severity ERROR
VCS-1003
Message <timestamp>, [VCS-1003], <sequence-number>, VCS, INFO, <switch-name>, Event: VCS
node add, Coordinator IP: <Co-ordinator's Public IP>, VCS ID: <VCS Id>, Status:
rBridge ID <RBridge-id of Added Switch> (<IP of Added Switch>) added to VCS
cluster.
Probable Cause Indicates that a node is added to the VCS cluster. The node is added when the following actions are
performed:
• DCM: VCS is enabled on a node that was not a member of the VCS cluster.