Technical data

Network OS Message Reference 179
53-1002489-01
SULB-1010
35
SULB-1010
Message <timestamp>, [SULB-1010], <sequence-number>,, INFO, <switch-name>, firmware
commit failed (status=0x<error code>).
Probable Cause Indicates that the firmware commit command has failed. The error code provides debugging
information. Refer to the Status messages and status codes table in the SULB-1009 message for
more information.
Recommended
Action
If the failure is caused by an inconsistent filesystem, contact your switch service provider.
Severity INFO
SULB-1011
Message <timestamp>, [SULB-1011], <sequence-number>,, INFO, <switch-name>, firmware
download command failed. <error string>.
Probable Cause Indicates that the firmware download command has failed. The additional error string indicates the
reason for the failure.
Recommended
Action
Execute the show firmwaredownloadstatus command for more information.
Severity INFO
SULB-1036
Message <timestamp>, [SULB-1036], <sequence-number>,, INFO, <switch-name>, <The Version
being logged> <Version String>.
Probable Cause Indicates the version running on the system. This is generally logged before download and after
download of the firmware to store version information.
Recommended
Action
No action is required.
Severity INFO
SULB-1037
Message <timestamp>, [SULB-1037], <sequence-number>, INFO, <switch-name>, Hot Code Load
(HCL) failed.
Probable Cause Indicates that the Hot Code Load (HCL) has failed. Many reasons, such as domain not confirmed,
can cause this failure.