Technical data

174 Network OS Message Reference
53-1002489-01
SULB-1004
35
SULB-1004
Message <timestamp>, [SULB-1004], <sequence-number>,, INFO, <switch-name>, firmware
commit has completed.
Probable Cause Indicates that the firmware commit command has been completed.
Recommended
Action
No action is required. Execute the show firmwaredownloadstatus command for more information.
Severity INFO
SULB-1009
Message AUDIT, <timestamp>, [SULB-1009], <sequence-number>,, INFO, <switch-name>,
firmware download command failed. status: 0x<status code>, error: 0x<error code>.
Probable Cause Indicates that the firmware download command failed. The additional status code and error code
provide debugging information.
Table 7 lists firmware download status messages and status codes. Some of them will not be
displayed in this RASLOG message and are listed for completeness.
TABLE 7 Status messages and status codes
Status message Status code
“firmware download sanity check failed.” 0x30
"Sanity check failed because system is non-redundant." 0x31
“Sanity check failed because firmware download is already in progress.” 0x32
"Sanity check failed because Network OS is disabled on the Active CP." 0x33
"Sanity check failed because the high availability management daemon (HAMD) is disabled
on Active CP."
0x34
“Sanity check failed because firmware download is already in progress.” 0x35
"Sanity check failed because Network OS is disabled on Standby CP." 0x36
"Sanity check failed because HAMD is disabled on Standby CP." 0x37
“firmware download failed on the Standby CP.” 0x40
“firmware download failed on the Standby CP.” 0x41
“firmware download failed on the Standby CP.” 0x42
“firmware commit failed on the Standby CP.” 0x43
“firmware download failed.” 0x44
“firmware download failed due to inter-process communication (IPC) error.” 0x50
"Unable to check the firmware version on Standby CP due to IPC error." 0x51
“firmware download failed due to IPC error.” 0x52
“firmware download failed due to IPC error.” 0x53
"Standby CP failed to reboot due to IPC error." 0x54