Technical data

Network OS Message Reference 173
53-1002489-01
Chapter
35
SULB System Messages
SULB-1001
Message <timestamp>, [SULB-1001], <sequence-number>,, WARNING, <switch-name>, firmware
download command has started.
Probable Cause Indicates that the firmware download command has been executed. This process takes about 17
minutes to complete. The process is set to time out after 30 minutes.
Recommended
Action
Do not fail over or power down the system during the firmware upgrade. Allow the firmware
download command to continue without disruption. No action is required.
Execute the show firmwaredownloadstatus command for more information.
Severity WARNING
SULB-1002
Message <timestamp>, [SULB-1002],<sequence-number>, , INFO, <switch-name>, firmware
download command has completed successfully.
Probable Cause Indicates that the firmware download command has completed successfully and the switch
firmware has been updated.
Recommended
Action
No action is required. The firmware download command has completed as expected.
Execute the show firmwaredownloadstatus command for more information. Execute the show
version command to verify the firmware version.
Severity INFO
SULB-1003
Message <timestamp>, [SULB-1003], <sequence-number>,, INFO, <switch-name>, firmware
commit has started.
Probable Cause Indicates that the firmware commit command has been executed.
Recommended
Action
No action is required. Execute the show firmwaredownloadstatus command for more information.
Severity INFO