Technical data

162 Network OS Message Reference
53-1002489-01
SSMD-1220
34
Recommended
Action
Delete and reapply the CoS7 interface Priority Tag policy.
Restart or power cycle the switch.
Severity WARNING
SSMD-1220
Message <timestamp>, [SSMD-1220], <sequence-number>,, WARNING, <switch-name>, QoS failed
adding member port 0x<member port> to LAG 0x<LAG port>.
Probable Cause Indicates conflicting QoS configurations on the member port.
Recommended
Action
Delete CEE or FCoE configuration on the member port.
Severity WARNING
SSMD-1221
Message <timestamp>, [SSMD-1221], <sequence-number>,, WARNING, <switch-name>, QoS
configuration rejected due to Long Distance configuration restriction on port
<member port>.
Probable Cause Indicates that the number of inter-switch links (ISLs) supported by the long distance configuration
has reached the maximum.
Recommended
Action
Disable the ISL port using the no fabric isl enable command.
Severity WARNING
SSMD-1222
Message <timestamp>, [SSMD-1222], <sequence-number>,, WARNING, <switch-name>, Long
distance configuration cannot be completed for Chip <ASIC slot number>/<ASIC chip
number> because ports are not shut down. Maximum retry count exceeded.
Probable Cause Indicates that the Network Service Module (NSM) has failed to disable all the ports after maximum
retry attempts.
Recommended
Action
Delete and reconfigure long distance on the link using the long-distance-port command.
Severity WARNING